Harbor Freight 10×12 Greenhouse
Starting Your Own Greenhouse – Growing to Survive:
With today’s high gas prices comes high food prices, but that’s not the only problem, with the apparent slow decay of our economic system we are also seeing problems in the quality of foods, and in particular the produce that we consume.
First was the spinach scare, then lettuce, now tomatoes. We decide to become proactive in this area by building a greenhouse in which to grow all our summertime vegetables. Any excess will be canned for winter consumption.

Step one was to find a space and design the greenhouse itself. We did a search on the web and found greenhouse prices running several thousand dollars which kinda makes this a loosing proposition. Searching further we found one model of greenhouse made by Harbor Freight, The HFGH 10×12 model 93358 for a mere $599. The price has now jumped to $789, probably due to the rising cost of aluminum and polycoarbonate, since both require oil to produce , but we managed to get in on an early season sale. If 10 x 12 is too big, try the HFGH 8 x 10 model 93920 for $499.

There are many good sites that will help you build and modify the Harbor Freight greenhouse and this seems to have become somewhat of a cult item for gardeners on a budget who have some do it yourself skills.

This blog site shows you seven time saving steps in building your HFGH.
It’s a great addition to the factory provided instructions and is a RECOMMENDED READ.

Here are a few pictures of our 12×24 DIY Garden Shed and 10×12 Harbor Freight Greenhouse project.

shed foundation

May 30 2008:  The 12×24 garden shed foundation.
Had this contracted out to a local concrete contractor.
Cost: about $1800.

garden shed rough inThe shed construction progress.
Notice the gravel pile and door on the south end.
This will eventually be the greenhouse foundation and entrance.
The frame on the ground is a 4×6 timber foundation for the greenhouse.

garden shed roof
Here the garden shed gets a roof.
Again, we contracted the labor out to a local roofing firm.
Cost of labor: about $250, and they were done in 2 hours.
A small price to keep me off  the roof.
garden shed with greenhouseAfter just under 30 days of construction, finally taking shape!
The greenhouse attached to the south side of the garden shed.
The total cost of the shed and greenhouse including concrete work, roofing and all ofthe materials was just under $5000.

harbor freight greenhouse model 93358

June 25 2008: Here is the final project result.
The greenhouse is in operation with plenty of growing space.
The structure rides out storms very well. This last weekend saw
50mph winds and hail. No problems whatsoever.
This photo also shows how the roof pitch of the greenhouse compares to a standard 6/12 pitch of the shed, just in case you are concerned with matching the roof pitch to your structure. Looks like 7/12 or 8/12 would match well.

inside the greenhouse, grow shevling structure.

The inside of the greenhouse features a heavy duty shelving structure made from 4×4 AC2 treated lumber stained a redwood color. The color of the raw lumber was not very appealing and the stain job was worth the effort. Be sure to stain BEFORE the polycarbonate panels are installed or they will become spattered with stain. There is about 32 feet of 32″ wide shelves and the upper support will be for future wire shelving. Do not use lumber shevles above or they will cut out a considerable amount of light.

We are now capable of growing our own vegetables in a controlled, bug free environment that should accelerate production and be a fun hobby for years to come. The next step is to add some basic automation for watering using and Allen Bradley Pico controller and a few relays and dishwasher water solenoids to feed a Misty Mate 17 nozzle patio cooler. We’ll keep you posted as this develops…
Have Fun!

Follow up:  I have been occasional losing panels during high wind storms. Luckily we have a fully fenced in yard and the panels have always been contained by the fence. For those who have lost panels, I can get 6mm replacement polycarbonate sheeting locally in DePere Wisconsin from the exactly same place Sundance supply gets their poly. I am a registered dealer for this material. Leave a comment if interested.

Tags: , , , , , , , , ,

This entry was posted on Tuesday, July 1st, 2008 at 10:19 am and is filed under Home Bars. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

8 comments so far

Lissa Roberts
 1 

I too have this greenhouse and have had problems with the clip system. I now need to replace some of these panels. They have been damaged by blowing out. Where do you get these and how much are they?

November 2nd, 2009 at 8:38 pm
Kathie Martinelli
 2 

I have two of these greenhouses. They are two years old and have been nothing but trouble. If you expect to keep the panels in, you will have to screw them down. There are some good web sites out there that tell you how to do that. Also, be aware that the Harbor Freight panels deteriorate very quickly. My roof panels are brittle and yellowing. I doubt if they have any UV protection at all. The panels are being advertised as being nearly indestructible. That is totally untrue. From what I hear, Harbor Freight is not standing behind the product. I don\\\’t know this for a fact because I haven\\\’t contacted them myself. If you replace panels, be sure to get good quality with a guaranteed life expectancy. I will have to replace many of my roof panels and will not be buying them from Harbor Freight. Everything they have is from China and there seems to be no quality control.

November 12th, 2009 at 10:01 am
Mark
 3 

I wouldn’t say nothing but trouble…you must consider the price and remember that any item sold at HF, is not the top of the line quality. I will agree that the panels can be a pain, but I’ve screwed them down with on center screw & nylon washer backed by a rubber o-ring and this greenhouse has withstood some very nasty wind storms. I live near DePere Wisconsin and there is a polycarbonate distributor here who sells a 6mm UV protected panel. I had set up a preliminary site at uvpoly.com but have received no inquiries.
Bottom line is that the aluminum frame is nearly indestructible and the 4mm panels could be replaced quite easily with the 6mm variety.

Oh, and about the made in China statement – I’ve got news: EVERYTHING is now made in China!

November 12th, 2009 at 10:10 am
 4 

Oops was doing a google search for roofing and came across this post. Not exactly what I was searching for but much more interesting lol! Oh well, gotta get back to work…thanks, bp

November 27th, 2009 at 11:08 am
Charlie Hunter
 5 

WE lost our 10×12 greenhouse with the last strong winds. I happened to be home and was watching it, but my last trip out to see if it was ok turned out to be the last time I saw it. It collapsed in the wind. I was abble to save 90+ percent of the panels but the metal frame work is a total loss. Would anyone like to purchase the plastic sheets?

January 4th, 2010 at 4:11 pm
Mark
 6 

Wow! – How strong were the winds and where do you live? I built my greenhouse with the north end attached to a garage, the east side blocked with large arbor vitae tress and the west side block by my house. We’ve had 60+ mph gusts and no problems.

January 4th, 2010 at 5:25 pm
Kevin S
 7 

Charlie – Very sorry to hear about your loss of the greenhouse. How fast were the gusts and was it in the open ? What a terrible shame, and all the work you put into it. JUST finished my 10×12 and must have spent over 150 hours building (and rebuilding) it. I’d heard about panel blow outs and have run a steel cable through most of the beams to at least keep them from getting away. I’d be interested in at least some of your panels as I’d like to build a vestibule / reinforcement between the GH and garage, and would like to have some replacements handy. Thanks.

January 4th, 2010 at 10:52 pm
Jenny G
 8 

I need to purchase at least one, preferably two roof panels. Please get back to me with price. I live in ventura, ca 93001

January 29th, 2010 at 2:03 pm

Leave a reply

Name (*)
Mail (will not be published) (*)
URI
Comment
Security Code: