The Classic Combo Wet Bar Project
|Plan Number: EHBP-10|
Model: Combo Bar Pub & Bar Back Project
Skill Level: Intermediate
Length: ~ 96"
Estimated cost to build: ~$600 varies
depending upon configuration and materials.
Plan Size: variable
|Order access to all plans|
EHMP-10: The Classic Combo Bar Project
This bar custom layout is created using a combination of either our EHBP-04 L-shaped bar or our EHBP-09 45 degree corner bar plan and the EMBP-01 3 in 1 Oak Bar Back. Changes can be made the 45 degree L-shaped bar and the EMBP-01 using the Custom Home Bar Design Tool.
| This two part project is available for resizing using the CHBD web tool.|
It is completely symmetrical for left or right hand bar layout.
This combo project is included with your membership when you join today.
EHBP-10 Classic Combo Project
|The Combo Bar Pub Project™ shows you how to build a sturdy, professional looking wet bar and bar back while still using basic power tools. Several configurations are possible.|
While this project looks like it may require a high level of woodworking skill, it does not. This project is intended for anyone with basic woodworking skills but requires a bit more attention to detail than our original easy designs. It is actually easier than ever to build.
Select either the L-shaped or 45 degree bar plans, size it to your available space the match it up with our full customizable bar back project.
Bar accepts standard residential sized kitchen sinks, ice bins and speed rails and all standard kitchen appliances such as dishwashers, Kegerators and compact or medium sized refrigerators and wine chillers. Easily build optional storage drawers, shelves bins & cabinets.
Premade bar arm rail moldings are recommended for this project.
Large Seating Area:
8 1/2 feet x 10 feet! That's 18 feet of seating space! Left side of bar intended to be attached to a wall. Design is symmetrical, works for either right or left handed layout. End cap design is variable - shelving options are variable. Bar back height and section sizes are variable.
Many configurations possible:
Straight Bar in any length.
Area in Bar Back for Mirror or LCD television display.
Or a combination of any number of modules for an infinite selection of shapes.
The bar shown above uses many of the design principles of the Classic Combo Bar design, except the 45 degree corner. The builder of this bar also used columns and corbels to finish off the project.
This combo project is included with your membership.
|Plans include: Suggested Material List, Tools Required, cut list, easy step by step instructions, Full 3D assembly drawings, assembly photographs to guide your project.|