- This topic has 1 reply, 2 voices, and was last updated 10 years, 6 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
What do you do with with the vertical sections of the beer gutter? Do you just poly them or does the envirotex allow you to let it run down the sides then just smooth it out with a brush?
If you can’t let it run down the sides of the beer gutter, you will have to dam up all the vertical sections, correct?
This has been addressed many times on forum, but yes, just use a brush to apply it like poly and use blue painters tape or wood strips with wax paper to dam up areas where it might drip.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.