- This topic has 3 replies, 4 voices, and was last updated 18 years, 4 months ago by .
-
Posts
-
I nwas reviewing the pdf plans for the L-shaped Bar and noticed what i believe to be a mistake. In the diagram on page-15 there are two beams called out as (#11). I believe these should actually be called out as (#10).
#11’s are 90″ long
#10’s are 87″ longThe #11’s are used in the previous diagram on pg-14. The ones on p[age 15 need to be 87″ to fit into the spot called out.
Let me know if this change does need to be made to my plans.
Liam1694u
Yup!
You are correct…the document is now corrected.
I guess I got carried away with my 11’s!Thanks for the info. I have added QC contact form links at the bottom of each plan overview page to report any problem you may find.
That is one of ten thousand errors in that plan. The concept is correct, measurements are entirely wrong…it even says just to subtract X feet from the yellows to change length x feet. That does not work. Glad I ignored the instructions to cut everything first as I would have had an expensive fire.
Ten thousand?
I went over it and found a few typos and fixed them.That plan will be revised soon in a more advanced version.
The original will be kept as is for novice builders.
I always recommend cutting only the parts for the step you are working on and, Measure twice, cut once.
- You must be logged in to reply to this topic.