fbpx

Material list doesn’t match cut list.

Home Bar Forum Forums Home Bar Project Construction Questions EHBP-11 Bar Back Project Material list doesn’t match cut list.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #19308 Score: 0

    What am I not seeing here?
    The material list calls for 4 1″x2″x8′ premium birch, poplar or aspen.

    The cut list calls for that board for the following:
    Front Base Frame – 94″ = 1 board
    Back Base Frame – 94″ = 1 board
    Base Sides and Middle 3×14.5 – 43.5″ = approx .5 boards
    Bottom Shelf Supports 8×14.5 – 116″ = 1.2 boards
    Mid shelf guides 2×16 – 32″ = .3 boards
    F&B Shelf Supports 8×46.75 – 366′ = 3.8 boards

    That requires 8 boards. So, where’s the mistake. Do I need to buy 4 more boards to finish the project, or should I be using a different board for one of the items on the cut list?

    #20674 Score: 0

    Looks like you did the necessary brain work, so just go ahead and buy what you need. Some items (finish items) are optional and not included on the material shopping list.

    #20568 Score: 0

    Just finished my back bar. Material list is a great guideline. However I and I am sure almost everyone that has built one of these has deviated a little to somewhat. I certainly did. This will change your shopping list the same way.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.