- This topic has 1 reply, 2 voices, and was last updated 3 years, 8 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
I have section B assembled, but after setting it in our area for the bar, I need to place section A in the place of section C, and eliminate section C all together. I don’t have room for anything to the bartender’s left of Section B. I am curious if this is doable for a very novice builder or if I’m screwed. Thanks for any help.
Should be easy enough to swap. It’s pretty much symmetrical.
If you just copy the overhead view, then flip it 180′ and paste for the reverse layout.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.