OSB height problem 38″ or 38.5?

[Anonymous]

All,

I’m at the point where I should be cutting and attaching the OSB boards to the front and side of the bar…. but there seems to be a discrepency. I measure 38.5″ from the top of the 2×4’s that make up the frame of the footrest to the top of the bar (without bar top installed). But, the cut list says these panels should be 38″ tall. I assume the cut list is right (38″) but why? Is there 1/2″ that I’m not taking into account? Does the OSB panel attach flush to the top of the bar framing or top of the footrest frame?

Thanks!
Eric

[Anonymous]

after some serious forum digging, I found someone else asked this same question:

http://forum.barplan.com/forum/viewtopic.php?t=324

May I suggest changing all the plans’ side/front paneling cutlist numbers to 38.5″ ??

[Author]

Posts