Re: 45 degree build with glass bricks

Tagged: 

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #21008 Score: 0

    I am looking to build something similar to the build featured on the home page. The bar appears to be the 45 degree and has glass bricks in the turn and facing.
    I purchased the packages to build this specific bar.
    Are there any modded plans for this build? And if so, where can I find them?

    Thank you

    #19174 Score: 0
    bartender_adm
      2 pts

      I’m guessing you’re referring to this bar:

      https://www.barplan.com/wp-content/uploads/2011/03/cool_bar-300×225.jpg

      It was definitely modified by the builder, but we don’t document the thousands of variations shown with drawings,. You get the core plans and then modify it as needed to fit your specific materials and desired decor.

      In this case, I’d build the EHBP-09, then, before sheeting the front, remove the front studs to match a frame box to fit within the removed studs. The frame box would hold your glass blocks and give the support lose by cutting sections out of your support studs.

      Go out and buy a glass block, measure it, post dimensions here and I’ll give you exact dimensions for the frame box and show which studs to cut.

      I’m moving this thread to the proper topic, (EHBP-09)

      • This topic was modified 6 years, 6 months ago by bpwdmin.
    Viewing 2 posts - 1 through 2 (of 2 total)
    • You must be logged in to reply to this topic.
    Easy Home Bar Plans