- This topic has 2 replies, 3 voices, and was last updated 12 years, 6 months ago by .
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
Hi, I recently dowloaded the plans for the 45 degree bar and in reviewing my materials and cut list the very first instructions for the Wedge supports is telling me to refer to part #12 in the cut list sheet…I can’t find #12 anywhere…
Please Advise
Thannk You#12 was indeed missing from the cut list, but it is shown on page 9 of the plan set. Just cut two 38 1/8″ long 2 x 4 boards with 45 degree ends as shown on page 9. I think this was not included on the cut list simply because of the extra attention to the 45 end cuts required.
I’ll update the cut list to reflect the statement on page 9. Thanks!
Shouldn’t they be 31 and 1/8th?
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.