- This topic has 1 reply, 2 voices, and was last updated 14 years ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
I’m not claiming to be advanced or even intermediate here but I’m looking at this tool and wanted to modify the main to 55″ and the side to 96″.
Using the CHDB tool, I did so and DIDN’T press the match buttons but in my list of materials have a negative number…2401 x L OSB Siding 1 -7 38 0.5 4′ x 8′ x .5” OSB Sheet
2801 x L User Select Paneling 1 -7 38 0.25 4′ x 8′ x .25” PanelingThoughts/suggestions/help!
Thank you for your time!
There was a misconfiguration for parts 2401 and 2801…
these side related parts should not change when the overall length is changed…
this has been corrected. (they were set to the X plane when they should have been on the Y plane)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.