- This topic has 1 reply, 2 voices, and was last updated 17 years, 8 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
I I was wondering if some would could give a maximun that the would allow the bar top to over hang the frame. I am using 3/4 poak plywood for the top. Is 4 inches to much on the front? Was wondering if it would warp or bend down over time.
Matt
Not a problem. The plans themselves will give you about 3 – 3.5″ overhang. You can even go a little more if it suits you, need more leg room etc.. Some people have talked about putting their bar on castors so, you know it is stable to do that.
Once finished the bar is quite stable but nothing is stopping you from anchoring to the floor or side wall if you feel it needs it.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.