- This topic has 1 reply, 2 voices, and was last updated 11 years, 2 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Thinking of doing the 36ga copper top with two part epoxy over the top. Anyone out there do this ?? If so, how was the epoxy process. I see on youtube they use a heat gun to get the bubbles out, looks easy but I’ve never done a epoxy finish ????
First off, Envirotex Lite is the product to use, and it will stick to metal. Be sure you have built up a “wall” all around the perimeter because envirotex stays liquid for a very log time.
I heat gun is fine, but a propane torch works better. Don’t worry, envirotex is not flammable.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.