- This topic has 1 reply, 2 voices, and was last updated 18 years, 6 months ago by .
-
Posts
-
I am going in order according to the plans and I’ve come to step 5 (Cut bar top).
1.) According to the plans of the bar top cut out dimensions, I assume the bar top will overlap on the sides by approx 1.5 inches and it will overlap on the front to accomodate the arm rest. Please correct me if I am wrong.
2.)When should I install the bar top. It doesn’t specify how or when in the plans. Please help.
Gregory Kurtz wrote:I am going in order according to the plans and I’ve come to step 5 (Cut bar top).1.) According to the plans of the bar top cut out dimensions, I assume the bar top will overlap on the sides by approx 1.5 inches and it will overlap on the front to accomodate the arm rest. Please correct me if I am wrong.
2.)When should I install the bar top. It doesn’t specify how or when in the plans. Please help.
1) I’m not 100% sure on the dimension of the overlap, but yes there is an over lap on three sides of the bar.
2) IIRC I put my top on prior to putting up the beadboard panels, but after all framing was complete. I put the top on and measured to determine the cut lenght I needed. I added the trim pieces last.
- You must be logged in to reply to this topic.