- This topic has 1 reply, 2 voices, and was last updated 12 years, 6 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hey everyone, im looking into building the straigt kegger bar and I found a fridge im going to use, its from sears and the dimensions are;
Height 24.9/10″
Width 18 6/10″
Depth 17 3/4″Now the part im confused on is the keg box framing. Since this fridge is slightly smaller dimensions than the fridge the plans were designed with am i supposed to adjust the framing so that it is flush with the fridge dimensions? or do I just fill in the gaps with insulation? Also do I leave the feet on the fridge or should i take them off? Thanks
Yes, adjust as needed to make it fit. Just be sure you use ample insulation.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.