- This topic has 1 reply, 2 voices, and was last updated 10 years, 3 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Based on my layout I’m gonna swap section C (and build section A in its place.) Can anyone advise a recommended minimum size to realistically fit a kegorator.
Also how wide would the finished product be with the arm rail? I know the plans say 29 inches but the diagram appears to have the countertop overhang just passed the molding.
Thanks
Go to the following link to get exact sizes for kegerator units.
You’re looking at about: 35″ H x 20″ W x 26-1/2″ D for the kegerator unit itself.
Some people just modify the floor by “C-sectioning” the floor in the kegerator area (cutting the front support 2×4 and omitting the raised floor) or depending upon the unit you buy, just remove the feet.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.